Rogers 4003 Low Profile RF PCB 20.7mil RO4003C LoPro Reverse Treated Foil with Gold for Low Noise Block.
(Printed Circuit Boards are custom-made products, the picture and parameters shown are just for reference)
RO4003C LoPro laminates use a proprietary Rogers' technology that allows reverse treated foil to bond to standard RO4003C dielectric. This results in a laminate with low conductor loss for improved insertion loss and signal integrity while maintaining all other desirable attributes of the standard RO4003C laminate system.
Features and Benefits:
RO4003C materials are reinforced hydrocarbon/ceramic laminates with very low profile reverse treated foil.
1. Lower insertion loss
2. Low PIM
3. Increased signal integrity
4. High circuit density
Low Z-axis coefficient of thermal expansion
1. Multi-layer board capability
2. Design flexibility
Lead-free process compatible
1. High temperature processing
- Meets environmental concerns
CAF resistant
Our PCB Capability (RO4003C LoPro)
| PCB Material: | Hydrocarbon Ceramic Laminates |
| Designation: | RO4003C LoPro |
| Dielectric constant: | 3.38±0.05 |
| Layer count: | Double Layer, Multilayer, Hybrid PCB |
| Copper weight: | 0.5oz (17 µm), 1oz (35µm), 2oz (70µm) |
| PCB thickness: | 12.7mil (0.323mm), 16.7mil (0.424mm), 20.7mil(0.526mm), 32.7mil (0.831mm), 60.7mil(1.542mm) |
| PCB size: | ≤400mm X 500mm |
| Solder mask: | Green, Black, Blue, Yellow, Red etc. |
| Surface finish: | Bare copper, HASL, ENIG, OSP, Immersion tin etc.. |
Some Typical Applications:
1. Digital applications such as servers, routers, and high speed back planes
- Cellular base station antennas and power amplifiers
- LNB’s for direct broadcast satellites
- RF Identification Tags
Typical Properties of RO4003C LoPro
| Property | Typical Value | Direction | Units | Condition | Test Method |
| Dielectric Constant, Process | 3.38 ± 0.05 | z | -- | 10 GHz/23°C | IPC-TM-650 2.5.5.5 Clamped Stripline |
| Dielectric Constant, Design | 3.5 | z | -- | 8 to 40 GHz | Differential Phase Length Method |
| Dissipation Factor tan, | 0.0027 0.0021 | z | -- | 10 GHz/23°C 2.5 GHz/23°C | IPC-TM-650 2.5.5.5 |
| Thermal Coeffifi cient of r | 40 | z | ppm/°C | -50°C to 150°C | IPC-TM-650 2.5.5.5 |
| Volume Resistivity | 1.7 X 1010 | | MΩ•cm | COND A | IPC-TM-650 2.5.17.1 |
| Surface Resistivity | 4.2 X 109 | | MΩ | COND A | IPC-TM-650 2.5.17.1 |
| Electrical Strength | 31.2(780) | z | KV/mm(V/mil) | 0.51mm(0.020”) | IPC-TM-650 2.5.6.2 |
| Tensile Modulus | 26889(3900) | Y | MPa(kpsi) | RT | ASTM D638 |
| Tensile Strength | 141(20.4) | Y | MPa(kpsi) | RT | ASTM D638 |
| Flexural Strength | 276(40) | | MPa(kpsi) | | IPC-TM-650 2.4.4 |
| Dimensional Stability | <0.3 | X,Y | mm/m(mils/inch) | after etch +E2/150°C | IPC-TM-650 2.4.39A |
| Coeffifi cient of Thermal Expansion | 11 | x | ppm/°C | -55 to 288°C | IPC-TM-650 2.1.41 |
| 14 | y |
| 46 | z |
| Tg | >280 | | °C TMA | A | IPC-TM-650 2.4.24.3 |
| Td | 425 | | °C TGA | | ASTM D3850 |
| Thermal Conductivity | 0.64 | | W/m/°K | 80°C | ASTM C518 |
| Moisture Absorption | 0.06 | | % | 48 hrs immersion 0.060” sample Temperature 50°C | ASTM D570 |
| Density | 1.79 | | gm/cm3 | 23°C | ASTM D792 |
| Copper Peel Strength | 1.05(6.0) | | N/mm(pli) | after solder float 1 oz. TC Foil | IPC-TM-650 2.4.8 |
| Flammability | N/A | | | | UL 94 |
| Lead-Free Process Compatible | Yes | | | | |
